jpmschweitzerandClaude 7846e48595 build(ci): move the pre-push gate into the Makefile
The hook carried ~50 lines of gitleaks logic and a comment explaining it was
self-contained because "this repo has no Makefile". It has one now, so the
reason is gone and the arrangement is backwards: a hook is a trigger, and
logic belongs where it can be read, run by hand, and changed under review.

.githooks/pre-push is now a byte-identical shim onto `make pre-push` in every
repo in the workspace. The scan itself moves to ci/secrets.sh unchanged, and
`make secrets` runs it on its own.

The call surface is identical everywhere; what it runs is not, and should not
be — each repo gates what it actually has. That is the point of standardising
the name rather than the contents: nobody has to read a repo to find out how
to check it.

secrets runs first, deliberately. It is the only failure here that cannot be
undone by fixing it afterwards — a failed lint costs another commit, a pushed
credential is cached and indexed whether or not it is later deleted.

Some of these gates fail today, on lint debt that predates them, and they are
left wired anyway. The board was measured once and written down in T-56
instead of being worked around here. Narrowing each gate to whatever already
passes would produce a gate that reports success for doing nothing, which is
the failure this workspace keeps rediscovering.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-08-09 18:57:22 +02:00

DeskLock

A living-room visual/audio endpoint for Tatlock, the homelab butler. DeskLock gives Tatlock a face and a voice on a Waveshare round touch display: you talk to it, it listens, thinks, and answers — the first line of contact with the butler backend running on tower-of-joy.

Hardware

Waveshare ESP32-P4-WIFI6-Touch-LCD-3.4C

Component Details
SoC ESP32-P4NRW32 — dual-core RISC-V @ 400 MHz + LP core
Memory 32 MB PSRAM (in-package), 32 MB NOR flash
Display 3.4" round IPS, 800×800, MIPI-DSI 2-lane, capacitive touch
Radio ESP32-C6-MINI-1 (Wi-Fi 6 + BLE 5) over SDIO via ESP-Hosted
Audio in Dual onboard microphones + ES7210 echo-cancellation ADC
Audio out ES8311 codec, PH2.0 2-pin speaker connector (8Ω 2W recommended)
Flashing USB-C (hold BOOT during reset for download mode)

The device is currently connected over USB-C directly to tower-of-joy, so build/flash happens on this server.

Architecture

┌──────────────────────┐  WebSocket: PCM audio + JSON events
│  DeskLock device     │◄───────────────────────────────────┐
│  (ESP32-P4)          │                                    │
│  • LVGL face         │     ┌──────────────────────────────┴───────────┐
│  • touch / wake word │     │  DeskLock Gateway  (container, :8600)    │
│  • mic capture + AEC │     │  thin orchestrator — no ML dependencies  │
│  • TTS playback      │     └───────┬──────────────────┬───────────────┘
└──────────────────────┘             │                  │  OpenAI-format HTTP
                                     │                  ▼
                          HTTP (LAN) │       ┌─────────────────────────────┐
                                     ▼       │  Speaches  (container, GPU) │
                     ┌────────────────────┐  │  • STT: faster-whisper      │
                     │  Tatlock (butler)  │  │  • TTS: Kokoro / Piper      │
                     │  http://tatlock    │  │  also usable by Open WebUI, │
                     │  :8000             │  │  Home Assistant, …          │
                     └────────────────────┘  └─────────────────────────────┘

Tatlock stays a text-only brain. The gateway orchestrates speech-to-text, chat, and text-to-speech; the Speaches container owns the actual STT/TTS models on the GPU, shared homelab-wide. The device firmware stays thin: audio transport, wake word, and face rendering only. Everything runs on the LAN — no cloud in the voice path.

See docs/architecture.md for the full design.

Repository layout

  • firmware/ — ESP-IDF (C, LVGL 9) application for the ESP32-P4
  • gateway/ — Python FastAPI voice gateway, deployed as a container on tower-of-joy
  • sim/face/ — browser simulator of the face (design source of truth; serve with python3 -m http.server and open index.html, or use ?state=…&nochrome=1 for screenshots)
  • docs/ — architecture and design notes

Roadmap

  1. Bring-up — display, touch, audio, 200 MHz PSRAM, cathedral gong
  2. Face + voice loop (in hardware test) — full LVGL face (7 states, rain, orbit, power ladder), Wi-Fi, WebSocket, touch-to-talk
  3. Voice (touch-to-talk) — tap to talk → gateway → Tatlock → spoken reply
  4. Wake word — esp-sr WakeNet on-device, echo cancellation, barge-in
  5. Polish — Tatlock-initiated notifications, presence, OTA updates

References

S
Description
No description provided
Readme
10 MiB
2026-07-19 12:32:13 +02:00
Languages
C 87.2%
C++ 8.5%
M4 1.6%
CMake 1%
Python 0.8%
Other 0.9%