Fork fix: the SDIO wedge is FIXED (esp-hosted-mcu #167)

Root cause (verified against our exact IDF tree, not the community guess): the "258" in "sdio_write_task: Failed to send data: 258" is NOT a timeout (that is 263). 258 = 0x102 = ESP_ERR_INVALID_ARG. On the ESP32-P4, block- mode CMD53 writes require the SOURCE buffer to be 64-byte (cache-line) aligned; the IDF sdmmc driver rejects a misaligned source with INVALID_ARG BEFORE any bus activity. esp_hosts write loop then declares "Unrecoverable host sdio state" and reboots the whole P4. The audio TX payload is not 64-aligned, so streaming mic audio wedged on the very FIRST frame (which is exactly what we saw: listening -> instant Failed to send -> reboot). This also explains why buffer/queue/clock/retry tuning all did nothing: the write never reached the bus. And why our symptom was instant, not after ~100 writes (the community block-mode-desync theory) — it is the first misaligned buffer, every time. Fix: vendored esp_hosted 2.12.11 as an editable local component (overrides the registry copy) and bounce a misaligned TX payload through one aligned DMA scratch buffer in hosted_sdio_write_block (port_esp_hosted_host_sdio.c). TX is serialized by the bus lock so a single static bounce buffer is safe; freed in hosted_sdio_deinit. Host-only change — no C6 reflash. VERIFIED ON HARDWARE (autonomous self-test): 40s of continuous mic-audio upstream streaming — the traffic that previously wedged on the first frame — ran clean, zero timeouts, zero reboots. A guarded SDIO_TX_SELFTEST harness is kept (compiled out) for future SDIO stress testing. Credit: root cause + patch designed via multi-agent investigation; the precise 258=INVALID_ARG decode (correcting the upstream community timeout assumption) came from checking our actual esp_err.h. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-15 09:50:27 +02:00
parent ac9d24e0f9
commit cb5826e02b
666 changed files with 216925 additions and 0 deletions
@@ -0,0 +1,3 @@
+idf_component_register(SRCS "host_gpio_expander_example.c"
+		PRIV_REQUIRES nvs_flash
+		INCLUDE_DIRS ".")
@@ -0,0 +1,112 @@
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <stdio.h>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_log.h"
+#include "esp_hosted.h"
+
+static const char* TAG = "gpio_expander_example";
+
+#define SLAVE_GPIO_PIN 2
+
+static esp_err_t configure_and_test_gpio(esp_hosted_cp_gpio_config_t *config, const char *demo_name)
+{
+	esp_err_t ret;
+	int level;
+
+	ESP_LOGW(TAG, "---- %s ----", demo_name);
+
+	ret = esp_hosted_cp_gpio_config(config);
+	if (ret != ESP_OK) {
+		ESP_LOGE(TAG, "GPIO config failed: 0x%x", ret);
+		return ret;
+	}
+
+	// For output modes, toggle the pin
+	if (config->mode == H_CP_GPIO_MODE_OUTPUT ||
+			config->mode == H_CP_GPIO_MODE_OUTPUT_OD) {
+
+		ESP_LOGI(TAG, "Setting GPIO %d LOW", SLAVE_GPIO_PIN);
+		esp_hosted_cp_gpio_set_level(SLAVE_GPIO_PIN, 0);
+		vTaskDelay(pdMS_TO_TICKS(500));
+
+		ESP_LOGI(TAG, "Setting GPIO %d HIGH", SLAVE_GPIO_PIN);
+		esp_hosted_cp_gpio_set_level(SLAVE_GPIO_PIN, 1);
+		vTaskDelay(pdMS_TO_TICKS(500));
+
+		ESP_LOGI(TAG, "GPIO toggled successfully");
+	} else {
+		// For input modes, read the level
+		ret = esp_hosted_cp_gpio_get_level(SLAVE_GPIO_PIN, &level);
+		if (ret == ESP_OK) {
+			ESP_LOGI(TAG, "GPIO %d level: %d", SLAVE_GPIO_PIN, level);
+		}
+	}
+
+	return ESP_OK;
+}
+
+void app_main(void)
+{
+	esp_err_t ret;
+	esp_hosted_cp_gpio_config_t gpio_config = {
+		.pin_bit_mask = (1ULL << SLAVE_GPIO_PIN),
+	};
+
+	// Initialize ESP-Hosted
+	ret = esp_hosted_init();
+	if (ret != ESP_OK) {
+		ESP_LOGE(TAG, "ESP-Hosted init failed: 0x%x", ret);
+		return;
+	}
+
+	ret = esp_hosted_connect_to_slave();
+	if (ret != ESP_OK) {
+		ESP_LOGE(TAG, "Connect to slave failed: %s", esp_err_to_name(ret));
+		goto cleanup;
+	}
+
+	ESP_LOGI(TAG, "ESP-Hosted initialized successfully");
+
+	// Demo 1: Standard output
+	gpio_config.mode = H_CP_GPIO_MODE_OUTPUT;
+	gpio_config.pull_up_en = 0;
+	gpio_config.pull_down_en = 0;
+	if (configure_and_test_gpio(&gpio_config, "Demo 1: Standard Output") != ESP_OK) {
+		goto cleanup;
+	}
+
+	// Demo 2: Open-drain output with pull-up
+	gpio_config.mode = H_CP_GPIO_MODE_OUTPUT_OD;
+	gpio_config.pull_up_en = 1;
+	gpio_config.pull_down_en = 0;
+	if (configure_and_test_gpio(&gpio_config, "Demo 2: Open-Drain Output") != ESP_OK) {
+		goto cleanup;
+	}
+
+	// Demo 3: Input with pull-up
+	gpio_config.mode = H_CP_GPIO_MODE_INPUT;
+	gpio_config.pull_up_en = 1;
+	gpio_config.pull_down_en = 0;
+	if (configure_and_test_gpio(&gpio_config, "Demo 3: Input with Pull-Up") != ESP_OK) {
+		goto cleanup;
+	}
+
+	// Demo 4: Input with pull-down
+	gpio_config.mode = H_CP_GPIO_MODE_INPUT;
+	gpio_config.pull_up_en = 0;
+	gpio_config.pull_down_en = 1;
+	if (configure_and_test_gpio(&gpio_config, "Demo 4: Input with Pull-Down") != ESP_OK) {
+		goto cleanup;
+	}
+
+	ESP_LOGI(TAG, "All demos completed successfully!");
+
+cleanup:
+	esp_hosted_deinit();
+}
@@ -0,0 +1,10 @@
+dependencies:
+  espressif/esp_hosted:
+    rules:
+    - if: target in [esp32p4, esp32h2]
+    version: '>=2.9.5'
+  espressif/esp_wifi_remote:
+    rules:
+    - if: target in [esp32p4, esp32h2]
+    - if: idf_version <6.1
+    version: '>=1.3.1'