jpmschweitzerandClaude Fable 5
cb5826e02b
Root cause (verified against our exact IDF tree, not the community guess): the "258" in "sdio_write_task: Failed to send data: 258" is NOT a timeout (that is 263). 258 = 0x102 = ESP_ERR_INVALID_ARG. On the ESP32-P4, block- mode CMD53 writes require the SOURCE buffer to be 64-byte (cache-line) aligned; the IDF sdmmc driver rejects a misaligned source with INVALID_ARG BEFORE any bus activity. esp_hosts write loop then declares "Unrecoverable host sdio state" and reboots the whole P4. The audio TX payload is not 64-aligned, so streaming mic audio wedged on the very FIRST frame (which is exactly what we saw: listening -> instant Failed to send -> reboot). This also explains why buffer/queue/clock/retry tuning all did nothing: the write never reached the bus. And why our symptom was instant, not after ~100 writes (the community block-mode-desync theory) — it is the first misaligned buffer, every time. Fix: vendored esp_hosted 2.12.11 as an editable local component (overrides the registry copy) and bounce a misaligned TX payload through one aligned DMA scratch buffer in hosted_sdio_write_block (port_esp_hosted_host_sdio.c). TX is serialized by the bus lock so a single static bounce buffer is safe; freed in hosted_sdio_deinit. Host-only change — no C6 reflash. VERIFIED ON HARDWARE (autonomous self-test): 40s of continuous mic-audio upstream streaming — the traffic that previously wedged on the first frame — ran clean, zero timeouts, zero reboots. A guarded SDIO_TX_SELFTEST harness is kept (compiled out) for future SDIO stress testing. Credit: root cause + patch designed via multi-agent investigation; the precise 258=INVALID_ARG decode (correcting the upstream community timeout assumption) came from checking our actual esp_err.h. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
159 lines
6.3 KiB
Plaintext
159 lines
6.3 KiB
Plaintext
# SYNOPSIS
|
||
#
|
||
# MY_CODE_COVERAGE()
|
||
#
|
||
# DESCRIPTION
|
||
#
|
||
# Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be
|
||
# included in the CFLAGS and LIBS/LDFLAGS variables of every build target
|
||
# (program or library) which should be built with code coverage support.
|
||
# Also defines CODE_COVERAGE_RULES which should be substituted in your
|
||
# Makefile; and $enable_code_coverage which can be used in subsequent
|
||
# configure output. CODE_COVERAGE_ENABLED is defined and substituted, and
|
||
# corresponds to the value of the --enable-code-coverage option, which
|
||
# defaults to being disabled.
|
||
#
|
||
# Usage example:
|
||
# configure.ac:
|
||
# MY_CODE_COVERAGE
|
||
#
|
||
# Makefile.am:
|
||
# @CODE_COVERAGE_RULES@
|
||
# my_program_LIBS = … $(CODE_COVERAGE_LDFLAGS) …
|
||
# my_program_CFLAGS = … $(CODE_COVERAGE_CFLAGS) …
|
||
#
|
||
# This results in a “check-code-coverage” rule being added to any Makefile.am
|
||
# which includes “@CODE_COVERAGE_RULES@” (assuming the module has been
|
||
# configured with --enable-code-coverage). Running `make check-code-coverage`
|
||
# in that directory will run the module’s test suite (`make check`) and build
|
||
# a code coverage report detailing the code which was touched, then print the
|
||
# URI for the report.
|
||
#
|
||
# LICENSE
|
||
#
|
||
# Copyright © 2012, 2014 Philip Withnall
|
||
# Copyright © 2012 Xan Lopez
|
||
# Copyright © 2012 Christian Persch
|
||
# Copyright © 2012 Paolo Borelli
|
||
# Copyright © 2012 Dan Winship
|
||
#
|
||
# Derived from Makefile.decl in GLib, originally licenced under LGPLv2.1+.
|
||
# This file is licenced under LGPLv2.1+.
|
||
|
||
AC_DEFUN([MY_CODE_COVERAGE],[
|
||
dnl Check for --enable-code-coverage
|
||
AC_MSG_CHECKING([whether to build with code coverage support])
|
||
AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no)
|
||
AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
|
||
AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
|
||
AC_MSG_RESULT($enable_code_coverage)
|
||
|
||
AS_IF([ test "$enable_code_coverage" = "yes" ], [
|
||
dnl Check if gcc is being used
|
||
AS_IF([ test "$GCC" = "no" ], [
|
||
AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
|
||
])
|
||
|
||
AC_CHECK_PROG([LCOV], [lcov], [lcov])
|
||
AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
|
||
|
||
AS_IF([ test -z "$LCOV" ], [
|
||
AC_MSG_ERROR([The lcov program was not found. Please install lcov!])
|
||
])
|
||
|
||
AS_IF([ test -z "$GENHTML" ], [
|
||
AC_MSG_ERROR([The genhtml program was not found. Please install lcov!])
|
||
])
|
||
|
||
dnl Build the code coverage flags
|
||
CODE_COVERAGE_CFLAGS="-O0 -g --coverage"
|
||
CODE_COVERAGE_LDFLAGS="--coverage"
|
||
|
||
AC_SUBST([CODE_COVERAGE_CFLAGS])
|
||
AC_SUBST([CODE_COVERAGE_LDFLAGS])
|
||
|
||
dnl Strip optimisation flags
|
||
changequote({,})
|
||
CFLAGS=`echo "$CFLAGS" | $SED -e 's/-O[0-9]*//g'`
|
||
changequote([,])
|
||
])
|
||
|
||
CODE_COVERAGE_RULES='
|
||
# Code coverage
|
||
#
|
||
# Optional:
|
||
# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
|
||
# (Default: $(top_builddir))
|
||
# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
|
||
# by lcov for code coverage. (Default:
|
||
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
|
||
# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
|
||
# reports to be created. (Default:
|
||
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
|
||
# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance.
|
||
# (Default: empty)
|
||
# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
|
||
# instance. (Default: empty)
|
||
# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
|
||
#
|
||
# The generated report will be titled using the $(PACKAGE_NAME) and
|
||
# $(PACKAGE_VERSION). In order to add the current git hash to the title,
|
||
# use the git-version-gen script, available online.
|
||
|
||
# Optional variables
|
||
CODE_COVERAGE_DIRECTORY ?= $(abs_top_builddir)
|
||
CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
|
||
CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
|
||
CODE_COVERAGE_LCOV_OPTIONS ?=
|
||
CODE_COVERAGE_GENHTML_OPTIONS ?=
|
||
CODE_COVERAGE_IGNORE_PATTERN ?=
|
||
|
||
code_coverage_quiet = $(code_coverage_quiet_$(V))
|
||
code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
|
||
code_coverage_quiet_0 = --quiet
|
||
|
||
# Use recursive makes in order to ignore errors during check
|
||
check-code-coverage:
|
||
ifeq ($(CODE_COVERAGE_ENABLED),yes)
|
||
-$(MAKE) $(AM_MAKEFLAGS) -k check
|
||
$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
|
||
else
|
||
@echo "Need to reconfigure with --enable-code-coverage"
|
||
endif
|
||
|
||
# Capture code coverage data
|
||
code-coverage-capture: code-coverage-capture-hook
|
||
ifeq ($(CODE_COVERAGE_ENABLED),yes)
|
||
$(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS)
|
||
$(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)"
|
||
-@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
|
||
LANG=C $(GENHTML) $(code_coverage_quiet) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
|
||
@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
|
||
else
|
||
@echo "Need to reconfigure with --enable-code-coverage"
|
||
endif
|
||
|
||
# Hook rule executed before code-coverage-capture, overridable by the user
|
||
code-coverage-capture-hook:
|
||
|
||
ifeq ($(CODE_COVERAGE_ENABLED),yes)
|
||
clean: code-coverage-clean
|
||
code-coverage-clean:
|
||
-$(LCOV) --directory $(CODE_COVERAGE_DIRECTORY) -z
|
||
-rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
|
||
-find . -name "*.gcda" -o -name "*.gcov" -delete
|
||
endif
|
||
|
||
GITIGNOREFILES ?=
|
||
GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
|
||
|
||
DISTCHECK_CONFIGURE_FLAGS ?=
|
||
DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
|
||
|
||
.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
|
||
'
|
||
|
||
AC_SUBST([CODE_COVERAGE_RULES])
|
||
m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])])
|
||
])
|