if !OPENTHREAD_RADIO
	comment "Radio Only Device must be selected:"
	comment "Component config"
	comment "└── OpenThread"
	comment "    └── Thread Core Features"
	comment "        └── Thread device type ──> Radio Only Device"
endif
if OPENTHREAD_COMMISSIONER
	comment "Disable Commissioner:"
	comment "Component config"
	comment "└── OpenThread"
	comment "    └── Thread Core Features"
	comment "        └── [ ] Enable Commissioner"
endif
if OPENTHREAD_JOINER
	comment "Disable Joiner:"
	comment "Component config"
	comment "└── OpenThread"
	comment "    └── Thread Core Features"
	comment "        └── [ ] Enable Joiner"
endif
if OPENTHREAD_SRP_CLIENT
	comment "Disable SRP Client:"
	comment "Component config"
	comment "└── OpenThread"
	comment "    └── Thread Core Features"
	comment "        └── [ ] Enable SRP Client"
endif
if OPENTHREAD_DNS_CLIENT
	comment "Disable DNS Client:"
	comment "Component config"
	comment "└── OpenThread"
	comment "    └── Thread Core Features"
	comment "        └── [ ] Enable DNS Client"
endif
comment " :warning: OpenThread UART port and Hosted UART transport port is same — pick a different UART port"
	depends on ESP_UART_HOST_INTERFACE && ESP_HOSTED_OT_UART_PORT = ESP_UART_PORT

choice ESP_HOSTED_OT_INTERFACE
	bool "OpenThread Transport"
	default ESP_HOSTED_OT_TRANSPORT_UART
	help
		Transport used communicate with OpenThread Host

	config ESP_HOSTED_OT_TRANSPORT_HOSTED
		bool "Use ESP-Hosted Transport"
		help
			Use ESP-Hosted transport to communicate with OpenThread Host

	config ESP_HOSTED_OT_TRANSPORT_UART
		bool "UART"
		help
			Use dedicated UART to communicate with OpenThread Host
endchoice

if ESP_HOSTED_OT_TRANSPORT_UART

	config ESP_HOSTED_OT_UART_PORT
		int "UART Port to Use"
		default 1
		range 0 1
		help
			Select UART Port to Use. Do not select the UART Port used for console output (if enabled)

	config ESP_HOSTED_OT_UART_PIN_TX
		int "TX GPIO number"
		default 14 if IDF_TARGET_ESP32C5
		default 21 if IDF_TARGET_ESP32C6
		default 12 if IDF_TARGET_ESP32H2
		default 17 if IDF_TARGET_ESP32H4
		help
			GPIO used for UART TX

	config ESP_HOSTED_OT_UART_PIN_RX
		int "RX GPIO number"
		default 13 if IDF_TARGET_ESP32C5
		default 20 if IDF_TARGET_ESP32C6
		default 22 if IDF_TARGET_ESP32H2
		default 18 if IDF_TARGET_ESP32H4
		help
			GPIO used for UART RX

	config ESP_HOSTED_OT_UART_BAUDRATE
		int "Baud Rate"
		default 460800
		range 9600 3500000
		help
			Baud Rate to Use. Make sure Hardware supports the rate.
			Standard rates are 9600, 19200, 38400, 57600, 115200, 460800, 921600

	choice ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS
		bool "Number of Data Bits"
		default ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_8
		help
			Number of Data Bits to use

		config ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_5
			bool "5 Bits"

		config ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_6
			bool "6 Bits"

		config ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_7
			bool "7 Bits"

		config ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_8
			bool "8 Bits"
	endchoice

	config ESP_HOSTED_OT_UART_NUM_DATA_BITS
		int
		default 0 if ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_5
		default 1 if ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_6
		default 2 if ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_7
		default 3 if ESP_HOSTED_OT_UART_PRIV_NUM_DATA_BITS_8

	choice ESP_HOSTED_OT_UART_PRIV_PARITY
		bool "Parity"
		default ESP_HOSTED_OT_UART_PRIV_PARITY_NONE

		config ESP_HOSTED_OT_UART_PRIV_PARITY_NONE
			bool "None"

		config ESP_HOSTED_OT_UART_PRIV_PARITY_EVEN
			bool "Even"

		config ESP_HOSTED_OT_UART_PRIV_PARITY_ODD
			bool "Odd"
	endchoice

	config ESP_HOSTED_OT_UART_PARITY
		int
		default 0 if ESP_HOSTED_OT_UART_PRIV_PARITY_NONE
		default 2 if ESP_HOSTED_OT_UART_PRIV_PARITY_EVEN
		default 3 if ESP_HOSTED_OT_UART_PRIV_PARITY_ODD

	choice ESP_HOSTED_OT_UART_PRIV_STOP_BITS
		bool "Number of Stop Bits"

		config ESP_HOSTED_OT_UART_PRIV_STOP_BITS_1
			bool "1"

		config ESP_HOSTED_OT_UART_PRIV_STOP_BITS_1_5
			bool "1.5"

		config ESP_HOSTED_OT_UART_PRIV_STOP_BITS_2
			bool "2"
	endchoice

	config ESP_HOSTED_OT_UART_STOP_BITS
		int
		default 1 if ESP_HOSTED_OT_UART_PRIV_STOP_BITS_1
		default 2 if ESP_HOSTED_OT_UART_PRIV_STOP_BITS_1_5
		default 3 if ESP_HOSTED_OT_UART_PRIV_STOP_BITS_2

endif

config ESP_HOSTED_OT_NETIF_QUEUE_SIZE
	int "OpenThread Network Interface Queue Size"
	default 10
	help
		The packet queue size for the OpenThread network interface

config ESP_HOSTED_OT_TASK_QUEUE_SIZE
	int "OpenThread Task Queue Size"
	default 10
	help
		The OpenThread task queue size