Adds test/terminal/core/core_test.dart — 36 unit tests across the
small standalone files that sit directly under
`lib/src/terminal/src/core/*.dart`:
- CellData (constructor + empty + getHash + toString),
- CursorStyle (default ctor, every set/unset attr getter pair, all
three colour-mode setters per channel, reset, the .empty
singleton) + CursorPosition,
- Charset (translate, designate/use, save/restore, asciiTranslator,
decSpecGraphicsTranslator with in-table, out-of-table, and high-
codepoint paths),
- TabStops (default 8-column grid, find with empty-range / out-of-
bounds / no-stop-in-range cases, setAt/clearAt/clearAll/reset),
- reflow (empty input, single-line passthrough, grow, shrink-with-
split, wrapped-run continuation, wide-char boundary on the new
width, inner wide-char clamp during _addPart, anchor reparent on
the main path, anchor reparent past trimmedLength).
Two source-side cleanups folded in:
- `CursorStyle.isItalis` was a defined-but-never-called getter
with a typo. No external callers reference it; renamed to
`isItalic` in the same change as the test that exercises it.
- `_LineBuilder.isEmpty` in reflow.dart was dead — the only callers
use `isNotEmpty` or check `_lines.isNotEmpty` separately.
Removed.
Coverage delta:
- cell.dart: 3/7 → 7/7.
- charset.dart: 12/25 → 25/25.
- cursor.dart: 2/62 → 62/62.
- tabs.dart: 0/23 → 23/23.
- reflow.dart: 24/72 → 71/71 (file shrank by one line after the
isEmpty getter removal).
- Total project: 52.72% → 54.62%; coverage_floor bumped 52 → 54.
Note for follow-up (not blocking): the post-loop "anchor.x >= to"
branch in reflow's `_addPart` reparents anchors past trimmedLength
onto whatever builder line is active at that moment. If no
subsequent content is added (no wrapped continuations after the
last shrink iteration), that builder line is never emitted by
`finish()` and the anchor lands on a dangling reference. The path
is exercised by the new test, but the contract it implements is
arguably broken — anchors that should follow the source content
end up off the visible buffer. Worth a separate ticket if real
terminals trip it.
Co-Authored-By: Claude <noreply@anthropic.com>
Adds test/terminal/input/input_test.dart — 58 unit tests covering
the keytab tokenizer, parser, unescape helper, KeytabRecord
toString shapes, Keytab.find modifier-matching rules, and the four
TerminalInputHandler implementations (CascadeInputHandler,
KeytabInputHandler, CtrlInputHandler, AltInputHandler).
Highlights:
- keytabUnescape: every documented backslash escape + \xHH hex.
- LineReader: peek/take/done, whitespace skip, readString
(alphanumeric/underscore), readUntil (both exclusive and
inclusive variants).
- tokenize: keyboard-name and key-define lines, comment + blank
stripping, shortcut vs string actions, error paths on malformed
input.
- KeytabParser: full mode-flag matrix, error paths on every
defensive throw reachable through the public addTokens API
(stray non-keyboard token, missing colon, modeStatus value other
than '+'/'-', non-mode token after modeStatus, action token of
wrong type, second token of wrong kind for both _parseName and
_parseKeyDefine).
- KeytabRecord.toString covers every supported flag (Alt, Control,
Shift, AnyMod, Ansi, AppScreen, KeyPad, AppCuKeys, AppKeyPad,
NewLine, Mac).
- Keytab.find: -Shift / +AnyMod / -AnyMod gating, mode-flag
filters (newLine, appKeyPad, appScreen, macos, appCursorKeys,
keyPad), -Ansi (VT52) skip, fallthrough to fallback record,
null when no key matches.
- KeytabInputHandler: every modifier combination's `*` placeholder
expansion (1..8 inclusive), default-keytab fallback, no-match
null, no-* passthrough.
- CtrlInputHandler: A..Z → 0x01..0x1A; null without ctrl, with
shift / alt, or on non-letter keys.
- AltInputHandler: A..Z → ESC + uppercase; null without alt, with
shift / ctrl, on macOS, or on non-letter keys.
- defaultInputHandler integration: keytab routing, fallthrough to
CtrlInputHandler.
Coverage delta:
- core/input/handler.dart: 4/54 → 54/54.
- keytab.dart: 0/29 → 29/29.
- keytab_record.dart: 0/44 → 44/44.
- keytab_token.dart: 0/82 → 80/82 (the two remaining lines are
defensive throws inside `_parseKeyboardNameDefine` /
`_parseKeyDefine` that are unreachable from tokenize() — the
callers only enter those functions after the `_isKeyboardNameDefine`
/ `_isKeyDefine` guards in the same file, so the inner readString
always matches).
- keytab_parse.dart: 0/65 → 63/65 (the two remaining lines mirror
the same shape — _parseName and _parseKeyDefine both check the
first token's type, but addTokens only delegates to them after
matching that type, so the throws are dead defensive code).
- keytab_default.dart: 0/4 unchanged — that's the file's own
`void main()` debug entrypoint that prints the parsed default
keytab; not part of the runtime contract.
- keytab_escape.dart: 0/14 → 14/14.
- Total project: 49.31% → 52.53%; coverage_floor bumped 49 → 52.
The 4 dead defensive throws are flagged but not removed in this
commit — they're a code-style call (defensive paranoia vs. dead-
code cleanup) that belongs in a separate review, not folded into a
test sweep.
Co-Authored-By: Claude <noreply@anthropic.com>
Adds test/terminal/buffer/buffer_test.dart — 67 unit tests against
the Buffer orchestrator on top of BufferLine. Drives a fake
TerminalState through writes, cursor moves, scroll regions,
erase commands, line insert/delete, resize (with and without
reflow), word-boundary lookup, getText, and the toString debug
dump.
Coverage delta:
- buffer.dart: 0 / 260 → 260 / 261 (one while-loop-body line
Dart coverage doesn't instrument distinctly; the loop's effect
is exercised end-to-end by the reflow-pad test).
- Total project: 39.12% → 43.20%.
- pubspec.yaml `coverage_floor:` bumped 39 → 43.
Notes:
- The fake TerminalState (`_State`) is a per-file impl rather than
a shared fixture; it stays close to the test that exercises it
and avoids forcing other terminal tests to depend on a one-shape-
fits-all stub.
- Tests that walk through `lineFeed` use `lineFeedMode: true` so
the column resets between newlines — otherwise the saturated
cursor X from a previous full-width write spills the next write
onto an extra line via `writeChar`'s autoWrap branch.
This closes the `core/buffer/` sub-area for T-91 — every leaf file
in `lib/src/terminal/src/core/buffer/` is now at >= 96% line
coverage; the only outliers are Dart-coverage-instrumentation
quirks, not real gaps.
Co-Authored-By: Claude <noreply@anthropic.com>
Adds test/terminal/buffer/line_test.dart — 51 unit tests covering
BufferLine and CellAnchor, hitting every reachable line in
lib/src/terminal/src/core/buffer/line.dart (192 / 192).
Coverage delta:
- line.dart: 0 / 194 → 192 / 192 (file shrank by two lines after
the prior commit's iteration fix folded two for-loop heads into
for-each-toList).
- Total project: 36.39% → 39.12%.
- pubspec.yaml `coverage_floor:` bumped 36 → 39 in lockstep.
Highlights:
- All packed-cell encodings (foreground/background/attrs/content
channels, codepoint+width packing, CellData round-trips).
- `eraseRange` wide-char neighbor extension on both ends.
- `removeCells` / `insertCells` shift logic, anchor reposition, and
the wide-tail-erase branch (insertCells case where the post-shift
last cell carries a wide marker).
- `resize` exercising the [64, 256) capacity-doubling branch and
the >=256 +32 branch separately.
- `getTrimmedLength` cols-clamp behaviour for null/over-capacity.
- `getText` skip-trailing-wide-char branch.
- `CellAnchor` lifecycle: detached construction, `reposition`,
`reparent` (both detached→attached and between owners), `dispose`,
attached y/offset via a real IndexAwareCircularBuffer.
Also cleans up five `unrelated_type_equality_checks` analyze infos
in test/terminal/buffer/range_test.dart by typing the RHS as Object
when intentionally probing the type-mismatch branch of operator==.
Co-Authored-By: Claude <noreply@anthropic.com>
Adds test/terminal/buffer/range_test.dart — 38 unit tests covering
the small pure-Dart files in lib/src/terminal/src/core/buffer/:
- cell_offset.dart 23 / 23 (was 0 / 23)
- range.dart 13 / 13 (was 0 / 13)
- segment.dart 13 / 13 (was 0 / 13)
- range_line.dart 30 / 30 (was 0 / 30)
- range_block.dart 48 / 48 (was 0 / 48)
Total project line coverage 34.90% → 36.39%; coverage_floor in
pubspec.yaml bumped 34 → 36 in lockstep.
Tests exercise the abstract BufferRange operator==/hashCode/toString
via a local _StubRange (BufferRangeLine and BufferRangeBlock both
override those, so the base versions are otherwise unreachable —
worth a stub rather than carving the lines out of coverage). The
denormalized-input branches in Block contain/toSegments/extend get
explicit cases too.
Pure Dart, no Flutter dependency — uses package:test/test.dart and
runs in <100ms.
First batch under T-91; line.dart and buffer.dart land in subsequent
commits with their own floor bumps.
Co-Authored-By: Claude <noreply@anthropic.com>
First child of T-89. Codifies "don't make coverage worse" as a
durable pre-push contract before any test-writing children land.
- pubspec.yaml: new `coverage_floor: 34` key. Single source of
truth for the floor; ratchets up only.
- ci/coverage_gate.sh: parses coverage/lcov.info (LH/LF), reads
the floor from pubspec.yaml, exits non-zero if integer-truncated
measured % drops below it. Self-contained awk parser — no `lcov`
CLI dependency.
- ci/test.sh: flutter test now runs with --coverage, so the gate
reads fresh data without an extra test invocation. Wall time
delta is small and stays inside the < 90 s pre-push budget
(D-29).
- Makefile: new `coverage-gate` target wires the script in;
`push-check` adds it as a dependency. The .githooks/pre-push
hook (already wired) picks this up automatically.
- .gitignore: ignore /coverage/ wholesale; the floor lives in
pubspec.yaml, nothing under coverage/ is committed.
Decision recorded as D-66 (decisions/testing.md). End target is
95%; reaching it is tracked as the rest of T-89's children.
Co-Authored-By: Claude <noreply@anthropic.com>
Bold attributes from terminal escapes now render in a real bold
weight instead of being silently flattened.
- pubspec.yaml: register JetBrainsMono Bold + BoldItalic at
weight 700 under family JetBrainsMono. Files already shipped on
disk; only the registration was missing.
- assets/licenses.yaml: bump JetBrainsMono weights_bundled to
[Regular, Italic, Bold, BoldItalic] per D-42 (the entry must
match what is actually wired into the family).
- lib/src/terminal/src/ui/painter.dart: revert the `bold: false`
override and drop the workaround comment. Bold now flows from
CellFlags.bold to TextStyle.fontWeight.
- test/terminal/painter_bold_metrics_test.dart: load Regular and
Bold via FontLoader and assert paragraph maxIntrinsicWidth is
identical (cell-grid drift = 0). JetBrainsMono Bold's monospace
by spec; this test is the canary for the day someone swaps the
font.
- test/goldens/goldens/{ci,linux}/clide_button.png: regenerate.
ClideButton's label renders slightly heavier on the bold variant
(expected — 0.28% pixel diff before regen).
Earlier perception of over-bolding in the Claude pane was
synthetic-bold smearing (Flutter overpaints when no Bold.ttf is
registered for the family), not legitimate bold rendering. Visual
A/B confirms a real Bold face renders crisp emphasis without the
smear, so no per-pane renderer config is needed.
Co-Authored-By: Claude <noreply@anthropic.com>
clide is an IDE for the Claude Code CLI. The previous tagline
"Flutter desktop IDE for Claude Code" overemphasized the host
toolkit (Flutter is implementation detail, immediately obvious to
contributors) and was ambiguous about whether the integration
target is the CLI specifically.
Updates the welcome subtitle (i18n catalog + widget test + view),
the project description in pubspec.yaml, README and CLAUDE.md, the
CLI banner, and the web manifest/index.
Co-Authored-By: Claude <noreply@anthropic.com>
Replace the xterm pub.dev package with owned code under
lib/src/terminal/. Based on xterm.dart v4.0.0 by xuty (MIT).
Quiver LRU replaced with hand-rolled LinkedHashMap cache.
Scrollable removed from TerminalView — scroll events are forwarded
via Listener.onPointerSignal instead. zmodem, debugger, and
suggestion modules stripped as unused.
Also: bundle clide.tmux.conf (no status bar, 50k scrollback,
mouse on, zero escape delay, isolated -L clide socket), bump PTY
read buffer to 64KB, add 2px terminal padding, drop bold
JetBrains Mono registration.
Co-Authored-By: Claude <noreply@anthropic.com>
Gitea remote kept as secondary (`gitea`). Updated repository URLs
in pubspec.yaml, licenses.yaml, and initial-plan.md. README rewritten
to reflect the current single-process Flutter architecture.
Co-Authored-By: Claude <noreply@anthropic.com>
Three format engines adopted per the new D-058 rule (format
engines clear the dependency bar; UI chrome stays in-house):
- jovial_svg 1.1.26 (BSD-3) — SVG renderer via CustomPaint
- markdown 7.2.2 (BSD-3) — GFM parser; renderer is ours
- flutter_widget_from_html_core 0.17.2 (MIT) — HTML renderer
Welcome screen now loads logo.svg via jovial_svg instead of a
raster PNG. POLICY.md updated with format engine rule. All three
documented in licenses.yaml.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two clean sets from their SVG sources:
logo.svg → logo-{16..1024}.png (bare, transparent)
appicon.svg → appicon-{16..1024}.png (on dark circle)
All rendered from 2048px masters. References updated in
pubspec.yaml, welcome view, and native runner.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
pubspec.yaml is now the single source of truth for version and
project metadata. Makefile reads version from pubspec.yaml. All
references to project.yaml across CLAUDE.md, CHANGELOG.md,
decisions, and skills updated.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Single Flutter package at the repo root. All code, tests, assets,
and platform directories moved from app/ to root. Package renamed
from clide_app to clide — all imports rewritten. Merged pubspec
combines core (ffi) and app (flutter, yaml, xterm) dependencies.
Makefile simplified: no APP_PRESENT conditionals, no cd, no daemon
lifecycle. 317 tests pass.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
test / unit + widget + golden + a11y (push) Failing after 39s
test / integration_test (xvfb) (push) Has been skipped
test / bundle smoke (xvfb 5s) (push) Has been skipped
test / daemon subprocess + web WASM smoke (push) Has been skipped
SurfaceTokens gains seven syntax-role fields (keyword, type,
string, number, comment, method, punct). Theme loader parses
the syntax: YAML block and injects values into the surface
override layer. Resolver defaults map syntax roles to semantic
colours so themes without explicit syntax blocks still compile.
Four new theme YAMLs (clide, midnight, paper, terminal) replace
summer-night. Palette keys mapped to the existing semantic layer;
syntax values pass through directly. Goldens regenerated for the
14→font-size change.
Co-Authored-By: Claude <noreply@anthropic.com>
PtySession wraps the ptyc helper: socketpair + Process.start + recvmsg
with SCM_RIGHTS for master-fd transfer, a background isolate that
loops on blocking read() and posts byte chunks, plus write/resize/
kill/close. close() SIGTERMs the child so the PTY's EOF wakes the
reader naturally; SIGKILL + fd close + isolate kill cover the edge
where the shell ignores SIGTERM — avoids the known Linux quirk where
closing an fd doesn't unblock an in-flight read() on it.
Env defaults stamp TERM=xterm-256color, COLORTERM=truecolor,
CLICOLOR_FORCE=1 so shells + tmux + Claude emit 24-bit sequences
that xterm.dart can render. User env (HOME / USER / SHELL) still
inherits via mergePtyEnv().
ffi: 2.1.3 added as a runtime dep — the FFI bindings for socketpair,
recvmsg, read/write, and ioctl(TIOCSWINSZ) need an allocator we're
not writing by hand. Justified in pubspec + listed in licenses.yaml
per D-042.
make test-core (ci/test_core.sh) runs the Flutter-free core tests
under a 120s hard timeout with setsid + process-group kill, wired
ahead of the fast app tests in push-check so a hung PTY test can't
wedge a pre-push. Current core suite: 24 tests in ~1s.
Co-Authored-By: Claude <noreply@anthropic.com>
First real content for the `clide` Dart package at the repo root.
One AOT-compiled binary (ADR 0005) with two modes:
* `clide --daemon` long-running unix-socket server; listens on
`$XDG_RUNTIME_DIR/clide-$USER.sock` with stale-socket
reclaim, accepts JSON-lines request/response traffic, clean
SIGTERM shutdown unlinks the socket file.
* `clide <subcommand>` one-shot; opens the socket, sends a
request, writes the response JSON to stdout, exits with the
dispatcher's error code per ADR 0006 (0/1/2/3/4). Unknown
subcommands forward to the daemon so extensions can register
their own without CLI changes.
Tier 0 handlers: `ping` (returns pong + version + UTC ts) and
`version`. Both are covered by `test/ipc/` + `test/daemon/`; the
subprocess test builds `bin/clide`, starts it, pings it, SIGTERMs
it, and asserts the socket file disappears.
Co-Authored-By: Claude <noreply@anthropic.com>
jpmschweitzerandClaude